Order Products : sales@su-jiao.com
Badaflex® TPE-S 75A 1205 2K S2
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gOcsKg_Badaflex-TPE-S-75A-1205-2K-S2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Badaflex® TPE-S 75A 1205 2K S2 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe. Primary attribute of Badaflex® TPE-S 75A 1205 2K S2: Good Adhesion. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 75 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 8.50 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 450 | % | DIN 53504 |
| Compression Set (23°C, 72 hr) | 25 | % | DIN 53515 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 28.0 | kN/m | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 240 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A R 218 V33 BLACK 34 N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Ultramid® B3WG6 GP | BASF Corporation | Nylon 6 | Ultramid® |
| DJSilicone NE-Z150 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| LEXAN™ EXL1414H resin | SABIC Innovative Plastics | PC | LEXAN™ |
| MARPOL® EVA 1820 | Marco Polo International, Inc. | EVA | MARPOL® EVA |
