Order Products : sales@su-jiao.com

HIPEX® HX8IDZ (Series: HTR/OR)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	HIPEX®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gNtnD1_HIPEXHX8IDZSeriesHTROR.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The HTR/OR Series is your material solution for applications requiring high temperature and oil resistance.

Typical applications

Closures

Fastenings

Flexible Connections

Seals

Material advantages

Excellent heat resistance up to 150°C

Excellent resistance against motor and gearbox oil

For injection molding

Recyclable

General Information
Features	Recyclable materials Heat resistance, high Oil resistance
Uses	Fasteners Connector Seals Shell
Appearance	Black
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.13	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	80		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Break)	7.50	MPa	ISO 37
Tensile Elongation ²(Break)	240	%	ISO 37
Tear Strength ³	22	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	50	%	ISO 815
70°C, 24 hr	55	%	ISO 815
120°C, 24 hr	60	%	ISO 815

Injection	Nominal Value	Unit
Drying Temperature	105	°C
Drying Time	2.0	hr
Suggested Max Moisture	0.10	%
Rear Temperature	210	°C
Middle Temperature	220	°C
Front Temperature	230	°C
Mold Temperature	40 - 60	°C
Injection Pressure	120 - 200	MPa
Back Pressure	2.00 - 10.0	MPa

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method B, right-angle specimen (cut)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Propilven F-600	Propilven, S.A.	PP Homopolymer	Propilven
SI-LINK™ AC DFDB-5451 NT	The Dow Chemical Company	PE, Unspecified	SI-LINK™
Kalix® 9950	Solvay Specialty Polymers	HPPA	Kalix®
Omnix® 9050	Solvay Specialty Polymers	HPPA	Omnix®
Star L POK D51 - BK84034	Eurostar Engineering Plastics	PK	Star L