Order Products : sales@su-jiao.com
SABIC® PP 570P
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gNKC2f_SABIC-PP-570P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PP Homopolymer for Injection Molding PP 570P is specially developed for producing rigid injection molding articles for general purpose applications. It gives consistent processability, good mechanicals and high gloss in the products. Typical Applications PP 570P can be used mainly for various houseware articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.2 to 2.5 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 32.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1630 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 35 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Vicat Softening Temperature | 155 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 to 240 | °C | |
| Middle Temperature | 200 to 240 | °C | |
| Front Temperature | 200 to 240 | °C | |
| Mold Temperature | 15.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Rate B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP GP3201 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Axiall PVC 18901 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Fiberfil® J-60/40/E | Fiberfil® Engineered Plastics Inc. | PP Homopolymer | Fiberfil® |
| Hifax HSBM CB 1151 G Black | LyondellBasell Industries | PP Impact Copolymer | Hifax |
| AURUM® JNF3020 | Mitsui Chemicals, Inc. | PI, TP | AURUM® |
