Order Products : sales@su-jiao.com
Polene EVA N 8045
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | TPI Polene Public Company Limited |
| Trademark: | Polene EVA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gMwYT9_Polene-EVA-N-8045.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polene EVA N 8045 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific or North America for blow molding, calendering, or injection molding. Primary attribute of Polene EVA N 8045: Low Temperature Resistant. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.947 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.5 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 22.0 | wt% | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 36 | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 3.50 | MPa | |
| Break | 30.0 | MPa | |
| Tensile Elongation (Break) | 830 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 58.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 130 to 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultradur® B 4300 G10 | BASF Corporation | PBT | Ultradur® |
| NILAMID® A3 W GF30 | Nilit Plastics | Nylon 66 | NILAMID® |
| Arlon® 25N | Arlon-MED | PTFE | Arlon® |
| Geon™ Vinyl Rigid Extrusion L9620 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| LUVOCOM® 1105-8730 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
