Order Products : sales@su-jiao.com

ICORENE® XC1451

Category:	LMDPE , Linear Medium Density Polyethylene
Manufacturer:	ICO Polymers APAC, A Division of A. Schulman
Trademark:	ICORENE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gKsTPa_ICORENE-XC1451.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ICORENE™ XC1451 is a linear medium density polyethylene specifically formulated as a flame retardant PE and designed to comply with the requirements of some Australian Standards and the FAR Airworthiness Standards. This unique formulation is also designed to minimise the loss of impact properties and contains a UV stabilisation package rated at UV8. ICORENE™ XC1451 can be formulated in a range of colours although some darker primary colours may be difficult to achieve. This grade is not suitable for articles in contact with food, drinking water or medicinal products. Note: Types and levels of pigments or other additives as well as part shape and wall thickness may affect properties of flame retardant grades. Specific grade and colour suitability for the application should be confirmed before use.

Message

ICORENE™ XC1451 is a linear medium density polyethylene specifically formulated as a flame retardant PE and designed to comply with the requirements of some Australian Standards and the FAR Airworthiness Standards. This unique formulation is also designed to minimise the loss of impact properties and contains a UV stabilisation package rated at UV8.

ICORENE™ XC1451 can be formulated in a range of colours although some darker primary colours may be difficult to achieve. This grade is not suitable for articles in contact with food, drinking water or medicinal products.

Note: Types and levels of pigments or other additives as well as part shape and wall thickness may affect properties of flame retardant grades. Specific grade and colour suitability for the application should be confirmed before use.

General Information
Additive	UV Stabilizer
Features	Flame Retardant Good Processability Low Smoke Emission
Agency Ratings	FAR 25-25853A
Appearance	Colors Available
Forms	Powder
Processing Method	Rotational Molding

Physical	Nominal Value	Unit	Test Method
Density	1.05	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	6.5	g/10 min	ASTM D1238

Resin Grade	Manufacturer	Category	Trademark
North American Santicizer® 278	Ferro Corporation	Plasticizer	North
Andur M-11 (94% 1,4BD, 6% TMP)	Anderson Development Company	PUR-Ester/MDI	Andur
Daelim Po1y® HX-102F	DAELIM INDUSTRIAL CO., LTD.	HDPE	Daelim Po1y®
LUVOCOM® 1/GF/20/TF/10/SI/2/BK	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®
NEOFLON™ AP-210	DAIKIN AMERICA, INC.	PFA	NEOFLON™