Order Products : sales@su-jiao.com
Alathon® 9305TC
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gKVLGs_Alathon9305TC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALATHON 9305TC is a high molecular weight high density copolymer with a broad bimodal molecular weight distribution. This resin exhibits high density and stiffness and is designed for grooved feed and smooth bore equipment. Typical applications for wire and cable include cable in conduit. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.075 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | > 200 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 23.4 | MPa | ASTM D638 |
| Fracture | 36.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 1000 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Thermal Crack Resistance - F50 | > 3.4 | month | ASTM D2951 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.6E+17 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 2.33 | ASTM D1531 | |
| Dissipation Factor (1 MHz) | 7.0E-5 | ASTM D1531 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 300 - 325 | °C | |
| Cylinder Zone 2 Temp. | 350 - 400 | °C | |
| Cylinder Zone 3 Temp. | 400 - 450 | °C | |
| Cylinder Zone 4 Temp. | 475 - 500 | °C | |
| Cylinder Zone 5 Temp. | 475 - 500 | °C | |
| Adapter Temperature | 475 - 500 | °C | |
| Melt Temperature | 475 - 500 | °C | |
| Die Temperature | 475 - 500 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Clariant Nylon 6/6 PA-113C | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Hiprolon® 90 NN LM | Arkema | Nylon 612 | Hiprolon® |
| Indothene LL 20FS010 | Reliance Industries Limited | LLDPE | Indothene LL |
| LNP™ LUBRICOMP™ KL004 compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ LUBRICOMP™ |
| PC-ABSCOM™ B300 | Polymer Compounders Limited | PC+ABS | PC-ABSCOM™ |
