Order Products : sales@su-jiao.com
LTM® 13
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | LTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gHmeRo_LTM-13.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LTM® prepregs are proprietary low temperature cure, epoxide based resin systems that may be post-cured to produce high temperature composite tools. LTM13 compliments the LTM10 series by offering a cost effective mould tooling system with a low temperature, 30°C (86°F), initial cure capability and a final end use temperature after suitable post-cure of 180°C (356°F). |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Shrinkage | |||
| -- 1 | 0.12 | % | |
| -- 2 | 0.050 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 3 | 180 | °C | |
| CLTE - Flow | |||
| -- 4 | 2.0E-6 to 3.0E-6 | cm/cm/°C | |
| -- 5 | 1.0E-5 to 1.2E-5 | cm/cm/°C |
| Note Message | |
|---|---|
| 1 . | Glass Tool |
| 2 . | Carbon Tool |
| 3 . | Fully Post-Cured (TMA) |
| 4 . | Carbon Tool |
| 5 . | Glass Tool |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsamid® AESNO P302 TL | Arkema | Nylon 12 | Rilsamid® |
| Ultra Purge P-O | Moulds Plus International USA, Inc. | Proprietary | Ultra Purge |
| Exelene® PP C3504 | Montachem International, Inc. | PP Impact Copolymer | Exelene® PP |
| FRAGOM PR/444 CD UV NERO | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| TOTAL Polyethylene HDPE B 5845 | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
