Order Products : sales@su-jiao.com
Dynaprene® SE9030A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Nantex Industry Co., Ltd. |
| Trademark: | Dynaprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gGXQ2N_Dynaprene-SE9030A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dynaprene® SE9030A is a Thermoplastic Elastomer (TPE) material filled with filler. It is available in Asia Pacific for injection molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 30 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow (300% Strain) | 1.17 | MPa | ASTM D412 |
| Tensile Strength - Across Flow (Yield) | 2.00 | MPa | ASTM D412 |
| Tensile Elongation - Across Flow (Break) | 560 | % | ASTM D412 |
| Tear Strength 1(23°C) | 12.3 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 13 | % | |
| 70°C, 22 hr | 35 | % |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE ME-1345N | Teknor Apex Company | TPE | Sarlink® TPE |
| THERMOLAST® K TF6STE (Series: FC/CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| ICORENE® 4007 | ICO Polymers EMEA, A Division of A. Schulman | PP Impact Copolymer | ICORENE® |
| I. Stern 550 | I. STERN & CO. INC. | PS (HIPS) | I. Stern |
| TechnoMid PA6 S GF 15 | TechnoCompound GmbH | Nylon 6 | TechnoMid |
