Order Products : sales@su-jiao.com
KRATON® D1116 K
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gG7Ztw_KRATON-D1116-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1116 K is a clear, radial triblock copolymer based on styrene and butadiene, with a polystyrene content of 23%. It is supplied from North America in the physical form identified below.
Kraton D1116 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | < 1.0 | g/10 min | |
| Antioxidant Additive 1 | 0.15 to 0.40 | % | Internal Method |
| Ash Content | Internal Method | ||
| KIM, Talc | 3.0 to 5.0 | % | |
| KT, Talc | 0.15 to 0.35 | % | |
| Polystyrene Content | 21 to 24 | % | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Viscosity - solution (Toluene) 20%wt (25°C) | 2.00 to 3.00 | Pa·s | Internal Method |
| Volatile Matter | < 0.70 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 16.0 | ||
| Styrene/Rubber ratio | 23/77 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 63 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(300% Strain) | 2.41 | MPa | ASTM D412 |
| Tensile Strength 3(Yield) | 31.7 | MPa | ASTM D412 |
| Tensile Elongation 4(Break) | 900 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Typical properties determined on film cast from toluene solution |
| 3 . | Typical properties determined on film cast from toluene solution |
| 4 . | Typical properties determined on film cast from toluene solution |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflex GM1210BA | LyondellBasell Industries | mLLDPE | Starflex |
| VAMPAMID 6 1026 V0 DF | Vamp Tech | Nylon 6 | VAMPAMID |
| Elastamax™ XL-2075 | PolyOne Corporation | TPO (POE) | Elastamax™ |
| Grilon® EBGM-30 HX | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| Karina IICE PVC COMPOUND 801-28/31-Y-ERYM (*) | Karina Ind. e Com. de Pl谩sticos Ltda | PVC, Unspecified | Karina |
