Order Products : sales@su-jiao.com
Dryflex® 51616 PS
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gDKCdw_Dryflex51616PS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex 51616 PS: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 30 IRHD Service Temperature Range: -50°C to 120°C Colour: Black, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Special Features: Designed for waste water pipe seal applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 - 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 34 | ISO 868 | |
| IRHD Hardness | 30 | ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| Acos flow : Yield | 2.30 | MPa | ISO 37 |
| Flow : Yield | 5.10 | MPa | ISO 37 |
| Tensile Elongation | ISO 37 | ||
| Transverse flow : Fracture | 740 | % | ISO 37 |
| Flow : Fracture | 450 | % | ISO 37 |
| Compression Set 2 | ISO 815 | ||
| -10°C, 72 hr | 55 | % | ISO 815 |
| 23°C, 72 hr | 12 | % | ISO 815 |
| 70°C, 24 hr | 33 | % | ISO 815 |
| Aging | Nominal Value | Test Method | |
|---|---|---|---|
| Change in Volume - Ozone Resistance | No cracking | ISO 1431-1 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 - 120 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 - 210 | °C | |
| Middle Temperature | 190 - 210 | °C | |
| Front Temperature | 190 - 210 | °C | |
| Mold Temperature | 15 - 50 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 210 | °C | |
| Cylinder Zone 2 Temp. | 150 - 210 | °C | |
| Cylinder Zone 3 Temp. | 150 - 210 | °C | |
| Cylinder Zone 4 Temp. | 150 - 210 | °C | |
| Cylinder Zone 5 Temp. | 150 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | Depending on shape of the detail and placement of gate |
| 2 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MIDILENA III PPJ800 | ROMPETROL PETROCHEMICALS S.R.L. | PP Homopolymer | MIDILENA III |
| Sindustris PC SC1005ML | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| UBE Polyethylene J5019 | UBE America, Inc. | PE, Unspecified | UBE Polyethylene |
| Bionate® 75D | DSM Biomedical Inc. | PC+TPU | Bionate® |
| Sylvin 2900-80 Clear Red 6286 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
