Order Products : sales@su-jiao.com
Borcoat™ EB133E-1199-LT
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Borealis AG |
| Trademark: | Borcoat™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gBuPbr_Borcoat-EB133E-1199-LT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Borcoat EB133E-1199-LT is an elastomer modified compound, based on polypropylene copolymer. It has excellent low temperature impact resistance. The product is coloured white. This product is thermal, as well as UV-stabilized. The product is supplied in pellet form |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.915 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | > 3000 | hr | ASTM D1693A |
| Moisture | % | Karl Fisher |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (220°C) | > 30 | min | ISO 11357 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 3 sec) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (1.00 mm) | 1000 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2/50 | ||
| Yield | 22.0 | MPa | ISO 527-2/50 |
| Fracture | > 20.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | ||
| Yield | 13 | % | ISO 527-2/50 |
| Fracture | > 400 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 4.0 | kJ/m² | ISO 179/1eA |
| -20°C | 5.0 | kJ/m² | ISO 179/1eA |
| 23°C | 60 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | > 135 | °C | ISO 306/A50 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 200 - 220 | °C | |
| Cylinder Zone 2 Temp. | 200 - 220 | °C | |
| Cylinder Zone 3 Temp. | 200 - 220 | °C | |
| Cylinder Zone 4 Temp. | 200 - 220 | °C | |
| Cylinder Zone 5 Temp. | 200 - 220 | °C | |
| Melt Temperature | 200 - 240 | °C | |
| Die Temperature | 200 - 240 | °C |
| Extrusion instructions |
|---|
| Head Temperature: 210 to 220°C |
| Note Message | |
|---|---|
| 1 . | Compound |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil MED-4135 | NuSil Technology | Rubber | NuSil |
| Ad-Tech Epoxy EL-337 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Cellidor CP 330-10 | ALBIS PLASTIC GmbH | CAP | Cellidor |
| ChronoFlex® C 55D | CardioTech International, Inc. | PUR, Unspecified | ChronoFlex® |
| MAGNUM™ 3616 | Trinseo | ABS | MAGNUM™ |
