Order Products : sales@su-jiao.com
VENELENE® 2111
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Poliolefinas Internacionales, C.A. (Polinter) |
| Trademark: | VENELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gBeTcp_VENELENE-2111.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features:
Applications:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.924 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 2.00 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 9.00 | MPa | |
| Break | 15.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 24 | % | |
| Break | > 500 | % | |
| Flexural Modulus | 200 | MPa | ASTM D790 |
| Flexural Strength (5.0% Strain) | 8.00 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact | 50.0 | J/cm | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 150 to 190 | °C | |
| Mold Temperature | < 20.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadraflex™ ALE-80A-B20 | Biomerics, LLC | TPU-Polyether | Quadraflex™ |
| Stanyl® TW341-B | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| EMERGE™ PC 8330 | Trinseo | PC | EMERGE™ |
| INEOS HDPE T50-800-01 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
| LNP™ THERMOCOMP™ WC006 compound | SABIC Innovative Plastics | Polyester, TP | LNP™ THERMOCOMP™ |
