Order Products : sales@su-jiao.com
Evoprene™ G 620
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mexichem Specialty Compounds Inc. |
| Trademark: | Evoprene™ G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g9EY8X_EvopreneG620.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Evoprene™G 620 is a thermoplastic elastomer (TPE) product,. It is available in North America or Europe. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shaw A, 10 seconds, 6.50mm) | 51 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 2.00 mm) | 1.40 | MPa | ISO 37 |
| Tensile Stress (Yield, 2.00 mm) | 6.60 | MPa | ISO 37 |
| Tensile Elongation (Break, 2.00 mm) | 560 | % | ISO 37 |
| Tear Strength 1(2.00 mm) | 25 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 22°C, 72 hr | 18 | % | ISO 815 |
| 70°C, 22 hr | 37 | % | ISO 815 |
| 100°C, 22 hr | 38 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (125°C, 336 hr) | 14 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (125°C, 336 hr) | 2.0 | % | ISO 188 |
| Change in Shore Hardness in Air (Shaw A, 125°C, 336 hr) | 3.0 | ISO 188 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 6.0 mm, BK | V-0 | UL 94 | |
| 6.0 mm, GY | V-0 | UL 94 | |
| 6.0 mm, NC | V-0 | UL 94 |
| Additional Information |
|---|
| The value listed as Density, ISO 1183, was tested in accordance with ISO 2782 test methods.Abrasion, DIN 53516: 268 mm³M-S, Alpha Gary Test Method: 15 kg/cm²M-S (Macklow Smith) flow measures force to extrude tape through die 10mm X 1mm. The higher the value the stiffer the flow (opposite to Melt Flow - MFI)Service Temperature: -30 to +130°COzone Resistance, 100 pphm, 200hrs, 20% strain, 35°C: No cracksOK for food contact: NoThermoplastic Compatability: PP |
| Note Message | |
|---|---|
| 1 . | Method B, right-angle specimen (without cut) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® MD 5.0.935 | Marco Polo International, Inc. | MDPE | MARPOL® MD |
| Xuchuan XCW-8230HT | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| ASTALAC™ ABS X17 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| ETILINAS HD6070UA | POLYETHYLENE MALAYSIA SDN BHD | HDPE | ETILINAS |
| EPO-TEK® GE120 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
