Order Products : sales@su-jiao.com
Trilliant™ HC 5410-0030RS Natural
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Trilliant™ HC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g8yuHi_Trilliant-HC-5410-0030RS-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Trilliant™ HC 5410-0030RS Natural is a High Density Polyethylene product filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 4140 | MPa | ASTM D638 |
| Tensile Strength 2(Break) | 41.4 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 4.0 | % | ASTM D638 |
| Flexural Modulus | 4140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.35 mm, Injection Molded) | 80 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 3.18 mm) | 116 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 193 to 221 | °C | |
| Mold Temperature | 26.7 to 54.4 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 5.1 mm/min |
| 2 . | Type I, 5.1 mm/min |
| 3 . | Type I, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silamid® EF | Roonamid a.s. | Nylon 6 | Silamid® |
| Baoding 67I70 | Baoding Bangtai Polymeric New-Materials Co.,Ltd | TPU-Polyester | Baoding |
| Akulon® F236-C | DSM Engineering Plastics | Nylon 6 | Akulon® |
| ELASTOSIL® R 101/25 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
| Lifoflex® UV FLAM 50700 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
