Order Products : sales@su-jiao.com
CONAPOXY® FR-1830
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONAPOXY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g7DGua_CONAPOXY-FR-1830.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CONAPOXY FR-1830 is a ambient cure, two-component, low viscosity, flame retardant epoxy potting, casting, and coating system with excellent handling properties. CONAPOXY FR-1830 contains a non-abrasive filler to reduce wear on machine metering/dispensing equipment. CONAPOXY FR-1830 is recognized to UL 94V-0 and is RoHS compliant. Products produced using CONAPOXY FR-1830 can be shipped into the European Union, however shipment into the EU of uncured part A and part B is restricted. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 0.965 | g/cm³ | |
| -- 2 | 1.59 | g/cm³ | |
| Water Absorption (24 hr) | 0.34 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 to 85 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 35.9 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 0.49 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 2.0E+15 | ohms | |
| Volume Resistivity (25°C) | 6.9E+14 | ohms·cm | |
| Dielectric Strength | 20 | kV/mm | |
| Dielectric Constant (25°C, 1 kHz) | 4.14 | ||
| Dissipation Factor (25°C, 1 kHz) | 0.017 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (4.80 mm) | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 20 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 2190 | cP |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Linear Shrinkage | 0.067 | % |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULABLEND® (ABS/PA) M/MK 20 GF | A. Schulman Europe | ABS+Nylon | SCHULABLEND® |
| Sindustris PP R3401 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| VITAMIDE® TB28GY6548 | Jackdaw Polymers | Nylon 66/6 | VITAMIDE® |
| IROGRAN® A 87 P 4946 | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| Hostacom HRC 181L W92341 | LyondellBasell Industries | PP Homopolymer | Hostacom |
