Order Products : sales@su-jiao.com
Thermoset Plastics 351
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g79TPQ_Thermoset-Plastics-351.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics 351 is an Epoxy; Epoxide (Epoxy) material filled with filler. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics 351 are:
Typical application of Thermoset Plastics 351: Wire & Cable |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 15.2 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 45 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 4.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.028 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 3.0 | ||
| Resin | Mix Ratio by Weight: 2.0 | ||
| Thermoset Mix Viscosity (25°C) | 45000 | cP | ASTM D2393 |
| Demold Time (121°C) | 120 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ EPDM2066-BK09 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| Precision Polymer V75M | Precision Polymer Engineering Ltd. | Fluorelastomer | Precision Polymer |
| Staramide BG4H | Eurostar Engineering Plastics | Nylon 6 | Staramide |
| Pibiflex® 2094S NATURALE | SO.F.TER. SPA | TPC-ET | Pibiflex® |
| Sylvin 8230-90 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
