Order Products : sales@su-jiao.com

Boda BDBR-H1701

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Chenguang Fluoro & Silicone Elastomers Co., Ltd.
Trademark:	Boda
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	g784Kb_Boda-BDBR-H1701.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Material Type: Black color base (alkali) resistance grade fluoroelastomer compound, hardness Shore A 65~75. Based on peroxide curable fluoroelastomer with high fluorine content.

Features:

Short post cure time

Excellent mold flow and mold release, resulting in less flash

Extraordinary chemical resistance:

Alkali

Alcohol Fuel

Steam

Acids

Chemicals containing amines, aromatic.

Process Methods: Suitable for compression, transfer, injection and extrusion molding process.

Applications: Heat exchanger gasket and other parts require chemical, steam and acid resistance.

Lab Testing Curing Condition:

Press Curing: 10min@170°C.

Oven: (1+4)hrs@230°C

General Information
Features	Acid Resistant Alcohol Resistant Alkali Resistant Fuel Resistant Good Chemical Resistance Good Flow Good Mold Release Good Moldability Minimal Flash Steam Resistant
Uses	Gaskets
Appearance	Black
Processing Method	Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.98	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	70		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	14.0	MPa	ASTM D412
Tensile Elongation (Break)	230	%	ASTM D412
Compression Set ¹(200°C, 70 hr)	32	%	ASTM D395

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (250°C, 70 hr)	-18	%	ASTM D573
Change in Ultimate Elongation in Air (250°C, 70 hr)	-9.0	%	ASTM D573
Change in Durometer Hardness in Air (250°C, 70 hr)	2.0		ASTM D573
Change in Tensile Strength (23°C, 70 hr, in Reference Fuel C)	-15	%	ASTM D471
Change in Ultimate Elongation (23°C, 70 hr, in Reference Fuel C)	-11	%	ASTM D471
Change in Durometer Hardness (23°C, 70 hr, in Reference Fuel C)	-3.0		ASTM D471
Change in Volume (23°C, 70 hr, in Reference Fuel C)	4.0	%	ASTM D471

Note Message
1 .	6 mm Buttons

Resin Grade	Manufacturer	Category	Trademark
TAISOX 8001	Formosa Plastics Corporation	HDPE	TAISOX
Zytel® HTN 51G15HSL NC010	DuPont Performance Polymers	PPA	Zytel® HTN
Jampilen EP440L	Jam Polypropylene Company	PP Copolymer	Jampilen
OmniLon™ PA6/6, 6 GR30	OMNI Plastics, LLC	Nylon 66/6	OmniLon™
Sylvin 8354-62D Yellow 4193	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin