Order Products : sales@su-jiao.com
Abstron IMC25
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Bhansali Engineering Polymers Limited |
| Trademark: | Abstron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g4bXIi_Abstron-IMC25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Abstron IMC25 is a Polycarbonate + ABS (PC+ABS) product. It is available in Asia Pacific. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 42.2 | MPa | ASTM D638 |
| Flexural Modulus 2(6.40 mm, Injection Molded) | 1860 | MPa | ASTM D790 |
| Flexural Strength 3(6.40 mm, Injection Molded) | 61.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 23°C, 3.20 mm, Injection Molded | 290 | J/m | |
| 23°C, 6.40 mm, Injection Molded | 130 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 4(1.8 MPa, Annealed, 6.40 mm, Injection Molded) | 103 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Type I, 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | Annealed at 95°C for 2 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Selvol™ E 203 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| Stanyl® ForTii™ K11 | DSM Engineering Plastics | Nylon 4T | Stanyl® ForTii™ |
| NILENE® P3 K20VA | Taro Plast S.p.A. | PP Homopolymer | NILENE® |
| Bergamid™ A700 G15 U-S0 BK035 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Plaslube® PC TL15 | Techmer Engineered Solutions | PC | Plaslube® |
