Order Products : sales@su-jiao.com
Sumitomo DAP 73-70-70 C-P
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g2rgCX_Sumitomo-DAP-73-70-70-C-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 73-70-70 C-P is a short glass fiber reinforced, flame retardant, diallyl ortho-phthalate molding compounds, which meet the requirements of ASTM D5948 Type SDG-F. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.91 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (Compression Molded) | 0.20 to 0.40 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.25 | % | ASTM D570 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability | ASTM D229 | ||
| Burning | 15.0 | sec | |
| Ignition | 115.0 | sec |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Compression Molded) | 76.0 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 11700 | MPa | ASTM D790 |
| Flexural Strength (Compression Molded) | 124 | MPa | ASTM D790 |
| Compressive Strength | 150 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | > 260 | °C | ASTM D648 |
| CLTE - Flow | 2.1E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity | 0.29 | W/m/K | ASTM C177 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Dielectric Constant 1 | ASTM D2520 | ||
| 1 kHz | 4.20 | ||
| 1 MHz | 3.50 | ||
| Dissipation Factor 2 | ASTM D150 | ||
| 1 kHz | 0.010 | ||
| 1 MHz | 0.014 | ||
| Arc Resistance | 130 | sec | ASTM D495 |
| Comparative Tracking Index | > 600 | V | IEC 60112, ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | ||
| 3.20 mm | V-0 | ||
| Oxygen Index | 45 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® FRGS25-66-NBK3 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| NEOFLON™ EC-6500 | DAIKIN AMERICA, INC. | ETFE | NEOFLON™ |
| Baoding 76I90 | Baoding Bangtai Polymeric New-Materials Co.,Ltd | TPU-Polyether | Baoding |
| EPO-TEK® 353ND-T4 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Sylvin 9915-55 BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
