Order Products : sales@su-jiao.com
DynaStat® 1357X
| Category: | PC , Polycarbonate |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaStat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g27Gdn_DynaStat-1357X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Static Dissipative Polycarbonate Features:
Applications:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 44.1 | MPa | ASTM D638 |
| Fracture | 35.9 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 20 | % | ASTM D638 |
| Fracture | > 100 | % | ASTM D638 |
| Flexural Modulus | 1720 | MPa | ASTM D790 |
| Flexural Strength | 600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 530 - 640 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+8 - 1.0E+11 | ohms | ASTM D257 |
| Static Decay | sec | NFPA 99 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 - 121 | °C | |
| Drying Time | 3.0 - 5.0 | hr | |
| Rear Temperature | 221 - 232 | °C | |
| Middle Temperature | 227 - 238 | °C | |
| Front Temperature | 232 - 243 | °C | |
| Nozzle Temperature | 232 - 243 | °C | |
| Processing (Melt) Temp | 232 - 243 | °C | |
| Mold Temperature | 37.8 - 82.2 | °C | |
| Injection Pressure | 34.5 - 82.7 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.345 - 0.689 | MPa | |
| Screw Speed | 40 - 70 | rpm | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 - 121 | °C | |
| Drying Time | 3.0 - 5.0 | hr | |
| Cylinder Zone 1 Temp. | 221 - 232 | °C | |
| Cylinder Zone 3 Temp. | 227 - 238 | °C | |
| Cylinder Zone 5 Temp. | 232 - 243 | °C | |
| Melt Temperature | 232 - 243 | °C | |
| Die Temperature | 232 - 243 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 25 to 100 RPM |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex WR-9310 | SAMSUNG SDI CO., LTD. | ASA | Starex |
| Ultramid® 66 H2 G/25-V0KB1 BK3324 | BASF Corporation | Nylon 66 | Ultramid® |
| Celstran® PA6-GF40-01 | Celanese Corporation | Nylon 6 | Celstran® |
| IDI SMC E-208 | IDI Composites International | TS, Unspecified | IDI SMC |
| LNP™ VERTON™ RV00CES compound | SABIC Innovative Plastics | Nylon 66 | LNP™ VERTON™ |
