Order Products : sales@su-jiao.com

NuSil CV-2500

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	g1fm9Y_NuSil-CV-2500.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Pourable, Optically Clear

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Pourable, Optically Clear

General Information
Features	Low to No Outgassing
Uses	Adhesives Aerospace Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0
Tack Free Time	10.0	hr

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Density	1.02	g/cm³
Viscosity ¹	8.0	Pa·s
Curing Time (150°C)	0.25	hr
Pot Life	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	50
Tensile Strength	6.89	MPa
Tensile Elongation at Break	130	%

Note Message
1 .	Part A

Resin Grade	Manufacturer	Category	Trademark
ALCOM® PC 740/4 UV WT1370-07LD	ALBIS PLASTIC GmbH	PC	ALCOM® PC
Clariant PC PC-1700G10FR	Clariant Corporation	PC	Clariant PC
EPO-TEK® 305	Epoxy Technology Inc.	Epoxy	EPO-TEK®
Polifil® PP GFPPCC-30	The Plastics Group	PP Homopolymer	Polifil® PP
Sylvin 6168-89 White 1254	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin