Order Products : sales@su-jiao.com
Hypro® PP-HP 35
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypro® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g0gB3s_Hypro-PP-HP-35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This product is intended for thin-wall injection molding applications as well as low denier filament yarns, extrusion coating and specialty cast embossed film. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.2 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 34.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 1(23°C) | 1550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 27 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 98.9 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 182 to 216 | °C | |
| Middle Temperature | 193 to 238 | °C | |
| Front Temperature | 204 to 249 | °C | |
| Nozzle Temperature | 193 to 238 | °C | |
| Processing (Melt) Temp | 204 to 249 | °C | |
| Mold Temperature | 21.1 to 48.9 | °C | |
| Injection Pressure | 3.45 to 10.3 | MPa |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FL 23 | Versalis S.p.A. | LDPE | Riblene® |
| Pro-fax RP323M | LyondellBasell Industries | PP Random Copolymer | Pro-fax |
| Moplen EP641P | PolyMirae | PP Copolymer | Moplen |
| NILAMID® A3 HHR GF30 | Nilit Plastics | Nylon 66 | NILAMID® |
| ALPERFORM ALTECH ABS A 1000/106 BL1249-05LS | ALBIS PLASTIC GmbH | ABS | ALPERFORM |
