Order Products : sales@su-jiao.com
ROTOLENE® High Flow
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | Polimeros Mexicanos S.A. de C.V. |
| Trademark: | ROTOLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fx3T3b_ROTOLENEHighFlow.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hexene Copolymer Linear Medium Density Polyethylene for rotational molding. This resin is fully UV8 stabilized. Available as natural and several colors powder compounds. Applications: High quality Polyethylene is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. It is recommended for intermediate bulk containers, toys, marine parts and indoor consumer articles. Excellent impact strength, stress crack resistance (ESCR) and procesability. Natural Resin, which is used as a carrier in color compounds meets all requirements of US food and drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | > 200 | hr | ASTM D1693 |
| 100% Igepal | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 18.0 | MPa | ASTM D638 |
| Fracture | 20.7 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 13 | % | ASTM D638 |
| Fracture | > 800 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 655 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact (-40°C, 3.18 mm) | 61.0 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 60.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Mechanical properties determined on rotomolded plaque 1/8 in (3.175mm) |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3617 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| SANREX S10G12 | Techno Polymer Co, Ltd. | SAN | SANREX |
| Nanjing Hongrui PP P201 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PP, Unspecified | Nanjing Hongrui PP |
| ACCUTECH™ CP0436T40L1 | ACLO Compounders Inc. | PP Copolymer | ACCUTECH™ |
| KOPA® KN135G15HIBL | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
