Order Products : sales@su-jiao.com
Bapolene® LD200B
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Bamberger Polymers, Inc. |
| Trademark: | Bapolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fwSxXN_Bapolene-LD200B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multipurpose extrusion/injection resin with excellent processability and good stiffness. This product meets FDA standards for food contact applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | 47 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 186 | MPa | ASTM D638 |
| Tensile Strength 1(Yield) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 600 | % | ASTM D638 |
| Flexural Modulus - Tangent 3 | 180 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 20 mm/min |
| 2 . | 20 mm/min |
| 3 . | Method I (3 point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stirol UPM-0703 E (extra) | JSC CONCERN STIROL | PS (HIPS) | Stirol |
| Viton® A | DuPont Performance Elastomers | Fluorelastomer | Viton® |
| Bergadur™ PB40 G15 UF UV | PolyOne Corporation | PBT | Bergadur™ |
| ENFLEX VL-120-80A | Ravago Group | PP+EPDM | ENFLEX |
| Plaslube® PA6 TL25 | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
