Order Products : sales@su-jiao.com
TPUCO® TPUE-E98
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Taiwan PU Corporation |
| Trademark: | TPUCO® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fw7Tg7_TPUCO-TPUE-E98.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPUCO® TPUE-E98 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific for extrusion. Primary attribute of TPUCO® TPUE-E98: Wear Resistant. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 98 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 5.0 | mg |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience | 26 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 11.8 | MPa | |
| 300% Strain | 24.5 | MPa | |
| Tensile Strength (Break) | 41.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 195 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Cylinder Zone 5 Temp. | 205 | °C | |
| Adapter Temperature | 215 | °C | |
| Die Temperature | 195 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESNO P210 TL | Arkema | Nylon 11 | Rilsan® |
| SLOVAMID® 6 T 15 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| 4DUR® 9K22220 | 4Plas | PBT | 4DUR® |
| AKROMID® A3 GF 35 natural (2421) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Elastollan® 1198 A | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
