Order Products : sales@su-jiao.com

Fluon® PTFE CD145E

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	Asahi Glass Co., Ltd.
Trademark:	Fluon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fvvGz8_Fluon-PTFE-CD145E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA. The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid. The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects. Applications: Low density tapes Characteristics: Low RR

Message

The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA.

The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid.
The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects.

Applications:

Low density tapes

Characteristics:

Low RR

General Information
Additive	Flame Retardant
Features	Flame Retardant Good Stretchability Homopolymer Low Density Low Molecular Weight
Uses	Electrical/Electronic Applications Hose Piping Tape Tubing
Forms	Powder

Physical	Nominal Value	Unit
Specific Gravity	2.17	g/cm³
Apparent Density	0.51	g/cm³

Additional Information	Nominal Value	Unit	Test Method
Extrusion Pressure ¹	1.90		Internal Method
Median Particle Size	550.0	µm
Reduction Ratio	50.0 to 500

Note Message
1 .	20° die angle, 16% ISOPAR H, and RR=1000

Resin Grade	Manufacturer	Category	Trademark
StarGRIP GP 55-9000	STAR Thermoplastic Alloys & Rubbers, Inc.	TPE	StarGRIP
Moplen RP310M	LyondellBasell Industries	PP Random Copolymer	Moplen
Daicel Styrol® SK50H	PlastxWorld Inc.	PS (HIPS)	Daicel Styrol®
ExxonMobil™ LDPE LD 165BW1	ExxonMobil Chemical	LDPE	ExxonMobil™ LDPE
Ebalta Xiameter RTV 4136-M	Ebalta Kunststoff GmbH	Silicone Rubber, RTV-1	Ebalta