Order Products : sales@su-jiao.com
MTEGRITY™ HDPE HD250
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | M. Holland Company |
| Trademark: | MTEGRITY™ HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | frW4O5_MTEGRITY-HDPE-HD250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MTEGRITY™ HDPE HD250 is a High Density Polyethylene product. It can be processed by injection molding and is available in North America. Typical application: Trays/Racks. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.947 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1000 | % | ASTM D638 |
| Flexural Modulus | 965 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 122 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Calprene® 419 | Dynasol Elastomers | SBS | Calprene® |
| ESTABIO PL 0560 T10 | Cossa Polimeri S.r.l. | Biodeg Polymers | ESTABIO |
| HiFill® PA6 0180 B | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Osterlene® HD0752 | Osterman & Company | HDPE | Osterlene® |
| Braskem PE HDB1052U1 | Braskem IDESA | HDPE | Braskem PE |
