Order Products : sales@su-jiao.com
KARINTOX 70/2
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Karina Ind. e Com. de Plásticos Ltda |
| Trademark: | KARINTOX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fpLc4w_KARINTOX-70-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HALOGEN FREE, FIRE RETARDANT, LOW SMOKE AND FUME POLYOLEFINIC COMPOUND RECOMMENDED FOR INSULATION OF ELECTRICAL CABLES UP TO 1KV. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.46 to 1.52 | g/cm³ | ASTM D792 |
| Color | OK | ME 12 | |
| Color a | -0.970 to 2.03 | ME 12 | |
| Color b | 5.36 to 8.36 | ME 12 | |
| Color L | 87.3 to 90.3 | ME 12 | |
| Moisture | < 600 | ppm | ME 52 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Bend (-15°C) | OK | IEC 60811-1-4 | |
| Hot Deformation (80°C) | 39.0 | NBR 6239 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Smoke Density - Transmittance | 75 | % | NBR 11300 |
| Toxicity | 0.650 | NBR 12139 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Corrosivity of Gases | 5.60 pH 5.00 µS/mm | NBR 11633 | |
| Halogen Acid Gas Evolution | 0.00 | mg/g | NBR 10495 |
| Maximum Variation of Elongation | < 20 | % | IEC 60811-1-2 |
| Maximum Variation of Tensile Strength | < 20 | % | IEC 60811-1-2 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 93 to 97 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | > 12.6 | MPa | IEC 60811-1-1 |
| Tensile Strain (Yield) | > 140 | % | IEC 60811-1-1 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2 | > 10.0 | MPa | IEC 60811-1-2 |
| Tensile Elongation 3(Break) | > 120 | % | IEC 60811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -35.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 4 | > 1.0E+14 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | > 36 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | 24 hr |
| 2 . | Aged in Air for 168 hr at 80°C |
| 3 . | Aged in Air for 168 hr at 80°C |
| 4 . | 24 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santron IMS2006 | Bhansali Engineering Polymers Limited | SAN | Santron |
| Sumikon® PM-6430 (Injection) | Sumitomo Bakelite North America, Inc. | Phenolic | Sumikon® |
| TECANYL® TECANYL® | Ensinger Inc. | PPE | TECANYL® |
| TRIEL® 5359GP | Samyang Corporation | TPEE | TRIEL® |
| EPOPLEN PP CFR 10 NC | EPSAN Plastik SAN. ve TiC. A.S. | PP, Unspecified | EPOPLEN |
