Order Products : sales@su-jiao.com
CPI PA6 40 Natural
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | CPI Binani, Inc. |
| Trademark: | CPI PA6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | foWYaX_CPI-PA6-40-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Nylon works very well as a glass filled product in the CPI Binani D-LFT process. It offers improved resistance to impact, modulus, and flex while creating a nice finished product with a pleasant finish. Nylon is somewhat heavier than polypropylene which may be a consideration when selecting materials for your product. The engineering staff at CPI Binani can provide additional information based on your completed Product Requirements Document (PRD) |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus | 13100 | MPa | |
| Tensile Strength | 214 | MPa | |
| Flexural Modulus | 10300 | MPa | |
| Flexural Strength | 324 | MPa | |
| Poisson's Ratio | 0.35 |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 350 | J/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® A3EG6 | BASF Corporation | Nylon 66 | Ultramid® |
| Addisil™ 480 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
| ESTACARB 2060 V0 HF | Cossa Polimeri S.r.l. | PC | ESTACARB |
| Iupiace® TH620 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| Monprene® RG-18260 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
