Order Products : sales@su-jiao.com
Braskem PE LDF6522
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem IDESA |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fidA4m_BraskemPELDF6522.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LDF6522 resin is a low density polyethylene designed for cast extrusion and injection molding sectors. It is used for flexible packaging and cardboard coating. It offers low neck in and optimum extrusion speed (Draw down). This resin meets U.S. FDA 21 CFR 177.1520. Applications: Extrusion Coating, Caps Injection, Masterbatch, Packaging for snacks, juices and condiments. Process: Cast Film Extrusion. Injection molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.922 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 11.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 530 | % | ASTM D638 |
| Flexural Modulus | 210 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1000 TFE 10 | RTP Company | PBT | RTP |
| Telcar® TL-1949A-55NT WHT 1165 | Teknor Apex Company | TPE | Telcar® |
| DOW™ HDPE DGDB-5004 NT 7 | The Dow Chemical Company | HDPE | DOW™ HDPE |
| Gravi-Tech™ X ET6000-0581 MG Black | PolyOne Corporation | Nylon 6 | Gravi-Tech™ |
| TOPAS® 6015S-04 | Topas Advanced Polymers, Inc. | COC | TOPAS® |
