Category: | TPE , Thermoplastic Elastomer |
Manufacturer: | Lion Polymers Incorporated |
Trademark: | Lionpol |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | fhkW4y_Lionpol-LC-62306.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Lionpol LC-62306 is a thermoplastic elastomer (TPE) product,. It is available in North America. |
General Information | |
---|---|
Features |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 23 | g/10 min | ASTM D1238 |
Molding Shrinkage | ASTM D955 | ||
Flow | 2.1 - 3.5 | % | ASTM D955 |
Transverse flow | 2.1 - 3.0 | % | ASTM D955 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness (Shore A) | 6 | ASTM D2240 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress (100% Strain) | 0.0965 | MPa | ASTM D412 |
Tensile Strength (Break) | 3.10 | MPa | ASTM D412 |
Tensile Elongation (Break) | 1200 | % | ASTM D412 |
Compression Set | ASTM D395 | ||
70°C, 22 hr | 19 | % | ASTM D395 |
100°C, 22 hr | 41 | % | ASTM D395 |
Additional Information |
---|
Permanent Set: 2% |
Injection | Nominal Value | Unit | |
---|---|---|---|
Rear Temperature | 141 - 179 | °C | |
Front Temperature | 163 - 202 | °C | |
Nozzle Temperature | 163 - 202 | °C | |
Mold Temperature | 21.1 - 32.2 | °C | |
Back Pressure | 0.345 - 1.03 | MPa |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Tenite™ Propionate 360A4861312 Clear, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
CYCOLOY™ CM4300 resin | SABIC Innovative Plastics Europe | PC+ABS | CYCOLOY™ |
KOPA® KN333G30CR | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
Jampilen EP548R | Jam Polypropylene Company | PP Copolymer | Jampilen |
SQUARE® LSR2034-65BS | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |