Order Products : sales@su-jiao.com
Elastollan® SP 883
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | BASF Polyurethanes GmbH |
| Trademark: | Elastollan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fei3t5_Elastollan-SP-883.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Polyether and Polyester Polyurethane Special products with excellent mechanical properties, outstanding wear resistance, good damping and resilience performance and excellent tear strength. Typical applications Application specific formulations. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 3 sec) | 85 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 40.0 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504 | ||
| 20% Strain | 2.00 | MPa | |
| 100% Strain | 5.00 | MPa | |
| 300% Strain | 10.5 | MPa | |
| Tensile Stress (Yield) | 40.0 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 550 | % | DIN 53504 |
| Tear Strength 1 | 60 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 22 | % | |
| 70°C, 24 hr | 37 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 175 to 240 | °C | |
| Mold Temperature | 20.0 to 70.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 175 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYFORT® FPP 30 GFC K1079 LE | A. Schulman Europe | PP Homopolymer | POLYFORT® |
| SLOVALEN® PH 91 N | Plastcom | PP, Unspecified | SLOVALEN® |
| Ingeo™ AW 300D | NatureWorks® LLC | PLA | Ingeo™ |
| LubriOne™ AS-000/15T | PolyOne Corporation | ABS | LubriOne™ |
| Hostaform® C 13021 XAP | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
