Order Products : sales@su-jiao.com
TITANLENE® LDI 305YY
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Lotte Chemical Titan (M) Sdn. Bhd. |
| Trademark: | TITANLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | feUyxh_TITANLENE-LDI-305YY.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TITANLENE® LDI 305YY is a Low Density Polyethylene material. It is available in Asia Pacific for injection molding. Important attributes of TITANLENE® LDI 305YY are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant | 157 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 10.8 | MPa | |
| Break | 10.8 | MPa | |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 87.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 to 240 | °C | |
| Mold Temperature | 25.0 to 50.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THORNEL® VMX-24 | Cytec Industries Inc. | Carbon/Epoxy | THORNEL® |
| Anjatech® 200C-DT2 | Almaak International GmbH | Nylon 6 | Anjatech® |
| Arlon® 55NT | Arlon-MED | Epoxy | Arlon® |
| PermaStat® 202 A | RTP Company | Nylon 6 | PermaStat® |
| MARPOL® HDB 504G | Marco Polo International, Inc. | HDPE | MARPOL® |
