Order Products : sales@su-jiao.com

Lusin® Clean G 295 C

Category:	Unspecified , Unspecified
Manufacturer:	Chem-Trend L.P.
Trademark:	Lusin®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	feN1hR_Lusin-Clean-G-295-C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
High Concentrated Purging Compound for Screws, Cylinders, Nozzles and Hot Runner Systems Benefits Specially developed for caps and closures production Concentrated: low consumption - economical Odorless during application Rapid cleaning effect NSF-registered; conforms to H2 listing requirements Suitable for use in hot runner system Lusin® Clean G 295 C is a highly-concentrated purging compound. It is specially developed for cleaning screws, cylinders and hot runner systems for caps & closure production. The compound consists of highgrade plastics with high efficient cleaning additives and contains no abrasives. Lusin® Clean G 295 C can be used at processing temperatures up to 295°C/570 °F. Approx. dosing instruction for cleaning screws, cylinders and hot runner systems Screw Diameter// Amount of Lusin® Clean G 295 C// Amount of Neutral PE or PP 50 mm (2 inch)// 5 kg (11 lbs)// 10 kg (22 l lbs) 75 mm (2.9 inch)// 7 kg (15.4 lbs)// 14 kg (31 lbs) 90 mm (3.5 inch)// 10 kg (22 lbs)// 20 kg (44 lbs) 120 mm (4.7 inch)// 15 kg (33 lbs)// 30 kg (66 lbs) Application/Dilutions Lusin® Clean G 295 C is suitable for color or material change as well as for removal of black points contamination and carbon residues from screws, cylinders, nozzles and hot runners. The concentrate blend is very efficient as it quickly removes contamination, resulting in faster return to defect free production. Specifically developed for use and blending with polyethylene or polypropylene, for purging and cleaning of olefin-contaminated screws, barrels and hot runner systems. We recommend the following cleaning procedure: 1. Prepare a mixture of 1 part concentrate (Lusin® Clean G 295 C) to 2 parts in-house resin (neutral PE or PP). See dosing table for approximate quantities. 2. Empty the cylinder 3. Fill the hopper with the mixture. See note (a) below. 4. Fill the cylinder with the plasticized mixture. Stop the screw for 3 - 5 minutes to allow for optimum cleaning. 5. After the 3 - 5 minute dwell, begin to expel the purge mixture. Color should change from the original color to a much lighter color (white /offwhite). See note (b) 6. Refill the cylinder, apply release agent (Lusin® Alro O 201F) onto the mold and begin producing caps /closures out of the concentrate blend. 7. In case of very resistant contamination, stop the process for 3 minutes to allow mixture to clean hot-runner/manifold. Repeat as necessary. 8. Restart production, continue until purge mixture is consumed or until the quality of the produced pieces are acceptable. Note: a) If the next production material to be processed has a different operating temperature than the previous production material, temperature adjustments can be made prior to step 4 above. b) If after the fourth shot you are still seeing contamination coming out, repeat steps 4 and 5 until the contamination is removed. Storage/Handling For further information on storage, handling, hazards, etc., please request a copy of Chem-Trend's Material Safety Data Sheet. Packaging Lusin® Clean G 295 C is available in 25-kg bags.

Message

High Concentrated Purging Compound for Screws, Cylinders, Nozzles and Hot Runner Systems

Benefits

Specially developed for caps and closures production

Concentrated: low consumption - economical

Odorless during application

Rapid cleaning effect

NSF-registered; conforms to H2 listing requirements

Suitable for use in hot runner system

Lusin® Clean G 295 C is a highly-concentrated purging compound. It is specially developed for cleaning screws, cylinders and hot runner systems for caps & closure production. The compound consists of highgrade plastics with high efficient cleaning additives and contains no abrasives.

Lusin® Clean G 295 C can be used at processing temperatures up to 295°C/570 °F.

Approx. dosing instruction for cleaning screws, cylinders and hot runner systems
Screw Diameter// Amount of Lusin® Clean G 295 C// Amount of Neutral PE or PP
50 mm (2 inch)// 5 kg (11 lbs)// 10 kg (22 l lbs)
75 mm (2.9 inch)// 7 kg (15.4 lbs)// 14 kg (31 lbs)
90 mm (3.5 inch)// 10 kg (22 lbs)// 20 kg (44 lbs)
120 mm (4.7 inch)// 15 kg (33 lbs)// 30 kg (66 lbs)

Application/Dilutions
Lusin® Clean G 295 C is suitable for color or material change as well as for removal of black points contamination and carbon residues from screws, cylinders, nozzles and hot runners. The concentrate blend is very efficient as it quickly removes contamination, resulting in faster return to defect free production.

Specifically developed for use and blending with polyethylene or polypropylene, for purging and cleaning of olefin-contaminated screws, barrels and hot runner systems.

We recommend the following cleaning procedure:
1. Prepare a mixture of 1 part concentrate (Lusin® Clean G 295 C) to 2 parts in-house resin (neutral PE or PP). See dosing table for approximate quantities.
2. Empty the cylinder
3. Fill the hopper with the mixture. See note (a) below.
4. Fill the cylinder with the plasticized mixture. Stop the screw for 3 - 5 minutes to allow for optimum cleaning.
5. After the 3 - 5 minute dwell, begin to expel the purge mixture. Color should change from the original color to a much lighter color (white /offwhite). See note (b)
6. Refill the cylinder, apply release agent (Lusin® Alro O 201F) onto the mold and begin producing caps /closures out of the concentrate blend.
7. In case of very resistant contamination, stop the process for 3 minutes to allow mixture to clean hot-runner/manifold. Repeat as necessary.
8. Restart production, continue until purge mixture is consumed or until the quality of the produced pieces are acceptable.

Note:
a) If the next production material to be processed has a different operating temperature than the previous production material, temperature adjustments can be made prior to step 4 above.
b) If after the fourth shot you are still seeing contamination coming out, repeat steps 4 and 5 until the contamination is removed.

Storage/Handling
For further information on storage, handling, hazards, etc., please request a copy of Chem-Trend's Material Safety Data Sheet.

Packaging
Lusin® Clean G 295 C is available in 25-kg bags.

General Information
Features	Low to No Odor
Uses	Purging Compound
Agency Ratings	NSF Unspecified Rating
Forms	Granules

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene P256-674UV	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
Nipol® SBR NS460	Zeon Corporation	SBR, Solution	Nipol® SBR
NuSil MED-4930	NuSil Technology	Silicone Rubber, LSR	NuSil
GLS ABS SG29	GLS Polymers Pvt. Ltd.	ABS	GLS ABS
ALTECH® NXT PP-H A 2040/456.01 LE GF40 CP	ALBIS PLASTIC GmbH	PP Homopolymer	ALTECH® NXT PP-H