Order Products : sales@su-jiao.com
Badaflex® TPU 80A 8018
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fcZPFG_BadaflexTPU80A8018.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Badaflex®TPU 80A 8018 is a thermoplastic polyurethane elastomer material,. This product is available in Europe, and the processing method is injection molding. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 30.0 | mm³ | DIN 53516 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength - MD | 45.0 | MPa | DIN 53504 |
| Tensile Elongation - MD (Break) | 620 | % | DIN 53504 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength - Flow | 60 | kN/m | DIN 53515 |
| Compression Set | DIN 53515 | ||
| 23°C, 72 hr | 25 | % | DIN 53515 |
| 70°C, 24 hr | 40 | % | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 175 - 200 | °C | |
| Mold Temperature | 30 - 60 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 GI-1120 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| ADEKA EPR-1415-1 | Adeka Corporation | Epoxy | ADEKA |
| KumhoSunny PBT 3710FG-NH | Shanghai KumhoSunny Plastics Co., Ltd. | PBT | KumhoSunny PBT |
| Plaslube® PPS GF30 SL2 | Techmer Engineered Solutions | PPS | Plaslube® |
| Durethan® AKV 50 H3.0 000000 | LANXESS GmbH | Nylon 66 | Durethan® |
