Order Products : sales@su-jiao.com
Generic PPSU - Glass Fiber
| Category: | PPSU , Polyphenylsulfone |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fbgYU2_Generic-PPSU---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPSU - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.43 - 1.50 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.40 - 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 6820 - 7010 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 169 - 186 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 79 - 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 3.5E-5 - 3.7E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 149 - 160 | °C | |
| Drying Time | 2.9 - 3.0 | hr | |
| Processing (Melt) Temp | 360 - 375 | °C | |
| Mold Temperature | 129 - 170 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PPSU - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2570F | Teknor Apex Company | TPE | Telcar® |
| Viton® VTR-8802 | DuPont Performance Elastomers | Fluorelastomer | Viton® |
| Mytex® AN16L-06 | Mytex Polymers | PP, Unspecified | Mytex® |
| IROGRAN® A 87 H 4615 | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| POLYfill PPH GF1030 PD2 | Polykemi AB | PP Homopolymer | POLYfill |
