Order Products : sales@su-jiao.com
Alkatuff® 710UV
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkatuff® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fZonwa_Alkatuff-710UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
710UV is a linear low density polyethylene specifically designed for rotational moulding and high speed extrusion processes. It has good ESCR, high chemical resistance and toughness. It contains a high level of UV stabiliser to give protection for outdoor use. 710UV is a high flow rotational moulding grade that is best suited to intricate items and low cycle times. 710UV is suitable for food contact applications and conforms to the requirements of the Food and Drug Administration Regulations of USA, (CFR21) Part 177.1520, paragraph (c), sub section 3.1 under conditions described in Part 178.2010 (for volumes greater than 18.9 litres and at temperatures below 65°C). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Antarox CO-630, F50) | 700 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 15.0 | MPa | ASTM D638 |
| Fracture | 11.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 470 | % | ASTM D638 |
| Flexural Modulus | 408 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-40°C) | 180 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 68.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 34.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 109 | °C | ASTM D1525 |
| Additional Information |
|---|
| Instrumented Puncture, Qenos Method, 23°C: 9.4J |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A FL2 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| VENYL ST400 BLACK 8229 | AD majoris | Nylon 6 | VENYL |
| Fainplast PVC CKL 87/5 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Flontech® FT-1-1T | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Hostacom TRC104N/1 NATRL | LyondellBasell Industries | TPO (POE) | Hostacom |
