CALIBRE™ 303-6

Category: PC , Polycarbonate Resin
Manufacturer: Trinseo
Trademark: CALIBRE™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: fZOWPp_CALIBRE-303-6.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
CALIBRE™ 300-6 Polycarbonate resins offer exceptional impact resistance, heat distortion resistance, and optical clarity as well as high melt strength for blow molding and sheet applications. The CALIBRE 300-6 series products are available in 4 additive packages: CALIBRE 300: No mold release or UV Stabilizer. CALIBRE 301: Mold release. CALIBRE 302: UV stabilizer. CALIBRE 303: Mold release and UV stabilizer.

Govt. and Industry Standards:
  • CSA (Canadian Standards Association)
  • Underwriters Laboratory, Inc. (UL)

Applications:
  • Automotive interiors
  • Automotive exteriors
  • Sheet applications
  • Electrical lighting/switches
  • Small & large appliances
  • Beverage containers/serviceware
  • Power equipment
General Information
Additive
  • Mold Release
  • UV Stabilizer
Features
  • Good Melt Strength
  • High Clarity
  • High Impact Resistance
Uses
  • Appliances
  • Automotive Applications
  • Automotive Exterior Parts
  • Automotive Interior Parts
  • Containers
  • Electrical/Electronic Applications
  • Lighting Applications
  • Sheet
Agency Ratings
  • CSA Unspecified Rating
Forms
  • Pellets
Processing Method
  • Blow Molding
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
  • Thermoforming
PhysicalNominal ValueUnitTest Method
Density 1.20g/cm³ISO 1183/B
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)6.0g/10 minISO 1133
Melt volume-flow rate (300°C/1.2 kg)5.00cm³/10minISO 1133 1
Molding Shrinkage - Flow 0.50 to 0.70%ISO 294-4
Water Absorption ISO 62
    23°C, 24 hr 0.15%
    Equilibrium, 23°C, 50% RH 0.32%
HardnessNominal ValueUnitTest Method
Rockwell Hardness ISO 2039-2
    M-Scale 73
    R-Scale 118
MechanicalNominal ValueUnitTest Method
Tensile Modulus 2300MPaISO 527-2/50
Tensile Stress ISO 527-2/50
    Yield 60.0MPa
    Break 72.0MPa
Tensile Strain ISO 527-2/50
    Yield 6.0%
    Break 150%
Flexural Modulus 22400MPaISO 178
Flexural Stress 397.0MPaISO 178
Taber Abrasion Resistance 45%ISO 9352
ImpactNominal ValueUnitTest Method
Charpy Notched Impact Strength ISO 179/1eA
    -30°C 14kJ/m²
    23°C 55kJ/m²
Notched Izod Impact Strength (23°C)93kJ/m²ISO 180/A
ThermalNominal ValueUnitTest Method
Heat Deflection Temperature
    0.45 MPa, Annealed 146°CISO 75-2/B
    1.8 MPa, Unannealed 126°CISO 75-2/A
    1.8 MPa, Annealed 143°CISO 75-2/A
Vicat Softening Temperature 151°CISO 306/B50
Ball Indentation Temperature > 125°CIEC 60335-1
CLTE - Flow 7.0E-5cm/cm/°CISO 11359-2
ElectricalNominal ValueUnitTest Method
Volume Resistivity > 1.0E+15ohms·cmIEC 60093
Electric Strength 17kV/mmIEC 60243-1
Dielectric Constant
    60 Hz 3.00IEC 60250
    1 MHz 3.00IEC 60250
    100 Hz 3.00IEC 60250
Dissipation Factor IEC 60250
    50 Hz 1.0E-3
    1 MHz 2.0E-3
Comparative Tracking Index (2.00 mm, Solution A)250VIEC 60112
FlammabilityNominal ValueUnitTest Method
Flame Rating 4UL 94
    1.50 mm HB
    3.00 mm HB
Glow Wire Flammability Index 5IEC 60695-2-12
    1.00 mm 900°C
    2.00 mm 875°C
    3.00 mm 875°C
Glow Wire Ignition Temperature 6IEC 60695-2-13
    1.00 mm 800°C
    2.00 mm 775°C
    3.00 mm 775°C
Oxygen Index 726%ISO 4589-2
OpticalNominal ValueUnitTest Method
Refractive Index 1.586ISO 489
Transmittance 89.0%ASTM D1003
Haze 1.0%ASTM D1003
Note Message
1 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .2.0 mm/min
3 .2.0 mm/min
4 .This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
5 .This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
6 .This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
7 .This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
Resin Grade Manufacturer Category Trademark
Silopren® LSR 2650 Momentive Performance Materials Inc. Silicone Rubber, LSR Silopren®
WELNEX™ RFG4VM Japan Polychem Corporation PP Random Copolymer WELNEX™
AIE PPO 9010-G30 Asia International Enterprise (Hong Kong) Limited PPE+PS AIE PPO
Sylvin 6235-80UV Grey 9591 Sylvin Technologies Incorporated PVC, Unspecified Sylvin
Neoplast™ 167 HOFR Zylog Plastalloys Pvt. Ltd. TPV Neoplast™