Order Products : sales@su-jiao.com

Eltex® EXP9415

Category:	mLLDPE , Metallocene Linear Low Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fX99AA_Eltex-EXP9415.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Eltex® EXP9415 is a polyethylene copolymer containing hexene-1 as the comonomer produced with a metallocene catalyst. It offers the following properties:

High impact strength & rigidity

Excellent optical properties

Very good bubble stability and extrudability.

Low temperature sealing characteristics

Eltex ® EXP9415 is formulated with antioxidants, slip and antiblock additives and a processing aid. Addition of other polymers, masterbatch and pigments may alter film slip and antiblock performance.

Applications
Eltex® EXP9415 has been developed for use in collation shrinkwrap, food packaging and other thin film applications where excellent balance between film strength and rigidity is required together with good optical properties. In addition, Eltex® EXP9415 offers easy extrudability

We recommend that you consult your INEOS technical representative for further advice on the use of Eltex® EXP9415

General Information
Additive	Antiblock (300 ppm) [Silica] Antioxidant Erucamide Slip (1000 ppm) Processing Aid
Features	Antiblocking Antioxidant Copolymer Food Contact Acceptable Hexene Comonomer High Impact Resistance High Rigidity Low Temperature Heat Sealability Opticals Slip
Uses	Film Food Packaging
RoHS Compliance	Contact Manufacturer
Processing Method	Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density ¹	0.927	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)	1.3	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction	< 0.30		ASTM D1894

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	25	µm
Tensile Modulus			ISO 1184
1% Secant, MD : 25 µm	230	MPa
1% Secant, TD : 25 µm	270	MPa
Tensile Stress			ISO 1184
MD : Yield, 25 µm	13.0	MPa
TD : Yield, 25 µm	13.0	MPa
MD : Break, 25 µm	55.0	MPa
TD : Break, 25 µm	50.0	MPa
Tensile Elongation			ISO 1184
MD : Break, 25 µm	570	%
TD : Break, 25 µm	690	%
Dart Drop Impact (25 µm)	200	g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD : 25 µm	160	g
TD : 25 µm	560	g

Optical	Nominal Value	Unit	Test Method
Gloss (45°, 25.0 µm)	65		ASTM D2457
Haze (25.0 µm)	7.0	%	ASTM D1003

Extrusion	Nominal Value	Unit
Melt Temperature	190 to 230	°C

Note Message
1 .	Conditioning ISO 1872/1

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom SC5-2020	Spartech Polycom	PP Copolymer	Spartech
Europrene® 1732	Versalis S.p.A.	SBR, Emulsion	Europrene®
Hanwha Total PP GH42W	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, High Crystal	Hanwha Total PP
IDI BMC B10 (Glass Content 15%)	IDI Composites International	TS, Unspecified	IDI BMC
Ingeo™ 10361D	NatureWorks® LLC	PLA	Ingeo™