Order Products : sales@su-jiao.com
Andur 1-75 DP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fWd6Ar_Andur-1-75-DP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 1-75 DP is a polyether based liquid isocyanate-terminated prepolymer. An elastomer with a hardness of 73-77 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'- methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, and by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 950 | cP | ASTM D2393 |
| 100°C | 230 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 8.3 to 8.7%Specific Gravity, ASTM D792, 212°F: 1.08 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4641P | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Nipol® 1203W | Zeon Chemicals L.P. | PVC+NBR | Nipol® |
| ALTECH® PP-B A 1000/120 UV | ALBIS PLASTIC GmbH | PP Copolymer | ALTECH® PP-B |
| DOW™ LDPE 505I | The Dow Chemical Company | LDPE | 陶氏低密度聚乙烯 |
| Sylvin 4200-60 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
