Order Products : sales@su-jiao.com
Dryflex® 670271
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fWK7np_Dryflex670271.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex 670271: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 27 Shore 00 Service Temperature Range: -50 -- +70°C (unstressed material) Colour: Natural, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 150°C/0.325 kg | 2.1 | g/10 min | ASTM D1238 |
| 150°C/2.16 kg | 50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore OO) | 27 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% secant | 0.100 | MPa | ASTM D638 |
| 300% secant | 0.100 | MPa | ASTM D638 |
| Tensile Strength | 0.900 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1000 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 4.40 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature 1 | -50 - 70 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 140 - 210 | °C | |
| Middle Temperature | 140 - 210 | °C | |
| Front Temperature | 140 - 210 | °C | |
| Mold Temperature | 15 - 50 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 210 | °C | |
| Cylinder Zone 3 Temp. | 150 - 210 | °C | |
| Cylinder Zone 5 Temp. | 150 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | Unstressed Material |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| U-polymer U-8400H | UNITIKA Plastics Division | Polyarylate | U-polymer |
| AKROMID® B3 GM 10/20 natural (3691) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| G-Lene I50A180 | Gas Authority of India Limited | HDPE | G-Lene |
| ALTECH® PA66 A 2050/109 GF50 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Sumiliteresin® PR-8000 | SBHPP | Phenolic | Sumiliteresin® |
