Order Products : sales@su-jiao.com

Boda BDP-K7702

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Chenguang Fluoro & Silicone Elastomers Co., Ltd.
Trademark:	Boda
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fVVos4_Boda-BDP-K7702.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Material Type: Brown color fluoroelastomer compound, hardness Shore A 65~75.
Based on peroxide curable fluoroelastomer with high fluorine content.

Features:

Short post cure time

Excellent mold flow and mold release, resulting in less flash Improved bonding adhesion to metal and excellent abrasion resistance.

Superior low temperature elastic and sealing property

Extraordinary chemical resistance:

Alcohol Fuel

Steam

Acids

Chemicals containing amines

Process methods: Suitable for compression, transfer, injection and extrusion molding processes.

Applications: Designed for the 3rd generation low friction oil seal.

Lab Testing Curing Condition:

Press Curing: 10min@170°C.

Oven: (1+4)hrs@230°C

General Information
Features	Alcohol Resistant Bondability Fuel Resistant Good Abrasion Resistance Good Adhesion Good Chemical Resistance Good Flow Good Mold Release Good Moldability Minimal Flash Steam Resistant
Uses	Seals
Appearance	Brown
Processing Method	Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.03	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	70		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	17.0	MPa	ASTM D412
Tensile Elongation (Break)	250	%	ASTM D412
Compression Set ¹(200°C, 70 hr)	25	%	ASTM D395

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (250°C, 70 hr)	-5.0	%	ASTM D573
Change in Ultimate Elongation in Air (250°C, 70 hr)	-7.0	%	ASTM D573
Change in Durometer Hardness in Air (250°C, 70 hr)	2.0		ASTM D573
Change in Tensile Strength (23°C, 70 hr, in Reference Fuel C)	-11	%	ASTM D471
Change in Ultimate Elongation (23°C, 70 hr, in Reference Fuel C)	-12	%	ASTM D471
Change in Durometer Hardness (23°C, 70 hr, in Reference Fuel C)	-1.0		ASTM D471
Change in Volume (23°C, 70 hr, in Reference Fuel C)	2.0	%	ASTM D471

Note Message
1 .	6 mm Buttons

Resin Grade	Manufacturer	Category	Trademark
Shinko-Lac® ASA E450	Mitsubishi Rayon America Inc.	ASA	Shinko-Lac®
apilon 52® 6013	API SpA	TPU-Polyester	apilon 52®
Dryflex® WS 40E450	ELASTO	TPE	Dryflex®
Generic PEEK - Aramid Fiber	Generic	PEEK	Generic
Geon™ Vinyl Rigid Extrusion L0678 Natural	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion