Order Products : sales@su-jiao.com
RTP 800 GB 30 DEL
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fQo2cv_RTP-800-GB-30-DEL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.60 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 1.5 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 3450 | MPa | ASTM D638 |
| Tensile Strength | 34.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 3450 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 69.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 37 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 270 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 163 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 118 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 - 210 | °C | |
| Middle Temperature | 177 - 210 | °C | |
| Front Temperature | 177 - 210 | °C | |
| Mold Temperature | 79.0 - 107 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AFFINITY™ SQ 1503UE | The Dow Chemical Company | POP | AFFINITY™ |
| Alathon® L5040 | LyondellBasell Industries | HDPE | Alathon® |
| ALTECH® PA6 A 2035/109 GF35 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Duron PEI 1110-WHT | ProPolymers Inc. | PEI | Duron |
| Electrafil® POM CO | Techmer Engineered Solutions | Acetal (POM) Copolymer | Electrafil® |
