Order Products : sales@su-jiao.com
INEOS Wire & Cable BPD2167
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | INEOS Wire & Cable |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fPceP2_INEOS-Wire-Cable-BPD2167.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BPD2167 is an unstabilised low density thermoplastic polyethylene. It is designed for use in "Câble de façade" application and one step silane crosslinking insulation. A carefully selected carbon black and additives master batch needs to be added to BPD2167 to reach the final “Cable de Façade” formulation. The best performance in terms of homogeneity, aging and anchorage tests is however obtained with the fully formulated black compound BPD8167, to which only the Silane mixture needs to be added. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.20 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 18.0 | MPa | IEC 60811-1-1 |
| Tensile Strain (Break) | > 500 | % | IEC 60811-1-1 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | > 22 | kV/mm | ASTM D149 |
| Dielectric Constant (50 Hz) | 2.30 | ASTM D150 | |
| Dissipation Factor (50 Hz) | 4.0E-4 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2807 | Covestro - Polycarbonates | PC | Makrolon® |
| Propafilm™ RD160 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| Andur 90 AP | Anderson Development Company | PUR-Ether/TDI | Andur |
| PermaStat® 600 CLEAR | RTP Company | ABS | PermaStat® |
| ULTEM™ 2210EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
