Order Products : sales@su-jiao.com
Elastocon® 8078B
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fMkEP5_Elastocon-8078B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Elastocon® 8078B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078B is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078B can be overmolded to polypropylene. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 82 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 5.06 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 9.43 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 570 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 - 193 | °C | |
| Front Temperature | 182 - 199 | °C | |
| Nozzle Temperature | 188 - 204 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa |
| Injection instructions |
|---|
| Elastocon® thermoplastic elastomers are shear dependent and have been formulated to process on conventional thermoplastic equipment for injection molding, extrusion or blow molding. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.4 | °C | |
| Cylinder Zone 1 Temp. | 191 - 232 | °C | |
| Cylinder Zone 2 Temp. | 191 - 232 | °C | |
| Cylinder Zone 3 Temp. | 191 - 232 | °C | |
| Cylinder Zone 4 Temp. | 191 - 232 | °C | |
| Cylinder Zone 5 Temp. | 191 - 232 | °C | |
| Die Temperature | 191 - 232 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 MS SI | RTP Company | Nylon 66 | RTP |
| Sinpolene MBB2185 | Teknor Apex Asia Pacific PTE. LTD. | PS (Specialty) | Sinpolene |
| SLOVALEN® PH 78 FRT 5 | Plastcom | PP, Unspecified | SLOVALEN® |
| TABOREX TA 1110 MD | SILON s.ro | MDPE | TABOREX |
| Sylvin 8940-80 NATURAL | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
