Order Products : sales@su-jiao.com
ICORENE® 7620 Fuel Lock
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fGQQeQ_ICORENE-7620-Fuel-Lock.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 7620 Fuel Lock is a high impact Polyamide 6 specifically developed for the rotational moulding of fuel tanks. This grade has been developed in collaboration with DSM. Once moulded the ICORENE® 7620 Fuel Lock has higher resistance through fuel evaporation. Thus, monolayer tanks of this grade with thin wall thickness can easily pass the permeation requirements of the Environmental Protection Agency (EPA, USA) for CE10. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ASTM D1505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 1800 | MPa | ISO 178/A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(0°C) | > 250 | J/cm | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 75.0 | °C | ISO 75-2/B |
| Melting Temperature | 220 | °C | ISO 3146 |
| Note Message | |
|---|---|
| 1 . | condition 1 hours in water at 70°C for a part of 3mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP EMI 2360.6 A | RTP Company | TPU-Polyester | RTP |
| NORYL™ NC212 resin | SABIC Innovative Plastics Asia Pacific | PPE+PS | NORYL™ |
| Akulon® F132-E2 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| APEX® 85-J023C-10 | Teknor Apex Company | PVC, Flexible | APEX® |
| Cheng Yu N6GV20 | Cheng Yu Plastic Company Limited | Nylon 6 | Cheng Yu |
