Monprene® CP-11180 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11180 is a medium hardness, high density, filled grade that is suitable for injection molding.

General Information
Features	High specific gravity High density Workability, good Good flexibility Good coloring Good adhesion Good chemical resistance Fill General Medium hardness
Uses	Water Sports Equipment Safety equipment Handle Electrical appliances Personal care Furniture Household goods Soft touch application Soft handle Sporting goods Toys Stationery Stationery Rubber substitution Consumer goods application field Knob
RoHS Compliance	RoHS compliance
Appearance	Opacity Available colors
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.15	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 5 sec)	80		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Across Flow (100% Strain)	3.10	MPa	ISO 37
Tensile Stress - Across Flow (Break)	11.8	MPa	ISO 37
Tensile Elongation - Across Flow (Break)	790	%	ISO 37
Tear Strength ¹			ISO 34-1
Transverse flow	40	kN/m	ISO 34-1
Flow	39	kN/m	ISO 34-1
Compression Set ²(70°C, 22 hr)	49	%	ISO 815

Additional Information	Nominal Value	Unit	Test Method
Apparent Shear Viscosity - Capillary, @ 206/s (200°C)	218	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	160 - 177	°C
Middle Temperature	182 - 204	°C
Front Temperature	193 - 216	°C
Nozzle Temperature	182 - 227	°C
Processing (Melt) Temp	182 - 227	°C
Mold Temperature	27 - 49	°C
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 12.7	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	Method B, right-angle specimen (without cut)
2 .	Type a

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fG6ksU_MonpreneCP11180PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 1502-65D	RTP Company	TEEE	RTP
ELASTOSIL® N 198	Wacker Chemie AG	Silicone	ELASTOSIL® N
HiFill® TPX-PVDF-03009 C	Techmer Engineered Solutions	PVDF	HiFill®
Hyundai EP XLPE XC300/Natural	HYUNDAI EP Co., Ltd.	XLPE	Hyundai EP XLPE
LEXAN™ HF1110R resin	SABIC Innovative Plastics	PC	LEXAN™