Order Products : sales@su-jiao.com
Hylex® P1002L1 HB
| Category: | PC , Polycarbonate |
| Manufacturer: | Entec Polymers |
| Trademark: | Hylex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fDOyao_HylexP1002L1HB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCARBONATE, LOW MELT FLOW, WATER CLEAR |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 2.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Water Absorption (Equilibrium) | 0.35 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 64.8 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | > 70 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2300 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 93.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 750 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 130 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL AH-GP1 | Polymer Resources Ltd. | Acetal (POM) Homopolymer | PRL |
| Sup-tech A9705P | Shanghai Suptech Engineering Plastics Co. Ltd. | Nylon 66 | Sup-tech |
| TARFLON™ G1910 | Idemitsu Kosan Co., Ltd. | PC | TARFLON™ |
| TOTAL Polystyrene Crystal 536W | TOTAL Refining & Chemicals | PS (GPPS) | TOTAL Polystyrene |
| TRIREX® Compound 3025GRU20 | Samyang Corporation | PC | TRIREX® Compound |
