Order Products : sales@su-jiao.com
OmniTech™ HDPE GRC30
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | OMNI Plastics, LLC |
| Trademark: | OmniTech™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fCkafc_OmniTech-HDPE-GRC30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% Glass Reinforced, Chemically Coupled, High Density Polyethylene |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 51.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.0 | % | ASTM D638 |
| Flexural Modulus | 3860 | MPa | ASTM D790 |
| Flexural Strength | 65.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 91 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 129 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 121 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm) | HB | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 204 to 249 | °C | |
| Middle Temperature | 204 to 249 | °C | |
| Front Temperature | 204 to 249 | °C | |
| Nozzle Temperature | 204 to 249 | °C | |
| Processing (Melt) Temp | 204 to 249 | °C | |
| Mold Temperature | 26.7 to 82.2 | °C | |
| Back Pressure | 0.345 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHLEN M1701 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| IDI STC 2450 | IDI Composites International | TS, Unspecified | IDI STC |
| INVISION™ GX 5080G2F | A. Schulman Inc. | TPE | INVISION™ |
| Paracril® 30.55XL | INSA | NBR | Paracril® |
| NORYL™ WCP921 resin | SABIC Innovative Plastics Asia Pacific | PPE+TPE | NORYL™ |
