Order Products : sales@su-jiao.com
Badaflex® TPE-S 30A 1384
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fBrE5t_Badaflex-TPE-S-30A-1384.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Elastomer as a standard injection moulding grade based on SEBS Copolymer Overmoulding capability: Polypropylene (PP) |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 30 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 2.50 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 550 | % | DIN 53504 |
| Compression Set | DIN 53515 | ||
| 23°C, 72 hr | 16 | % | |
| 70°C, 24 hr | 42 | % | |
| 100°C, 24 hr | 72 | % |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Tear Strength | 11.0 | DIN 53504 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTODUR® X9405 | Evonik Industries AG | PBT | VESTODUR® |
| Ad-Tech Urethanes UC-4960-1 | Ad-Tech Plastic Systems Corp. | TSU | Ad-Tech Urethanes |
| Daicel PP PTS4N1 | Daicel Polymer Ltd. | PP, Unspecified | Daicel PP |
| Huafon HF-3660D | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| SQUARE® LIM8600-50A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
